Trim-to-fit sunstrip (to suit most modern Lotus car windscreens)
IMPORTANT NOTE: We do not recommend using overlaid vinyl decals on these sunstrips, as they are designed to be used on their own, and there may be issues with adhesion when layered. If you decide to layer additional vinyl, you do so at your own risk. If you would like to discuss a custom printed sunstrip, please get in touch.
These strips of material are pre-cut to your choice of height (125 or 150mm) and wide enough to fit most Lotus windscreens up to 1250mm wide. Please measure the width of your screen and check before ordering. If you are in any doubt or need some assistance, please get in touch.
The ends of this strip must be trimmed to fit your own screen once the strip has been installed. Simply wet-install with soapy water and a squeegee, before trimming the edges with a sharp knife
Satin black (125mm / 150m deep) - cut from premium 100 micron wrapping material, with a smooth satin-black finish and air-release technology for bubble-free installation.
3D carbon fibre(125mm / 150m deep) - a satin-black finish with textured carbon fibre effect, 150 micron thickness.
The sunstrip will be sent rolled in a tube, full instructions supplied.
Images for illustration purposes only, colours and finishes may vary from what you see on your screen. Note that 100% perfect fitment is not guaranteed as each car is slightly different; however you can position to get the best balance for your particular vehicle.