Top cover - OLED display version (Multisystem 2 Analogue)

Replacement top cover for MMS2 Analogue, with recess and hole for generic 0.96" OLED display.

Contents:

• 1 x console top cover with RFID card slot
  
• 2 x RFID card buffers (pre-installed)

You will need to remove and re-use the screws from your original MMS2 case which hold the top cover in place.  You will also need a colour-coded logo insert (sold separately) or you can re-use your original black insert.

The recess and display cut-out is designed to fit any generic 0.96" OLED display (colour or monochrome).  These can be fitted into the recess then wired to the console's 4-pin I2C connector.

Images are for illustration only, to give you a visual confirmation on the part and colour you've ordered.  As the part is 3D printed, you should expect some visibility of layer lines and other slight imperfections common with printed parts. Actual colours may vary compared to how they are perceived on-screen.

Please allow 2-3 days for dispatch as all parts are printed to order.